Description
Masters Golf Spring-Rod Grip Remover
The Masters Golf Spring-Rod Grip Remover (TL289) is a professional-grade club servicing tool designed to remove golf grips cleanly and efficiently, without destroying them in the process. Unlike destructive cutting methods, this clever tool lets you slide grips off intact so they can be stored and re-installed — saving money on replacement grips and preserving your favourite rubber or cord wraps for future use. Ideal for club-repair workshops, custom fitters, and dedicated DIY golfers who regrip their own equipment at home.
- Grip-Preserving Removal: Removes grips intact so they can be saved and re-installed, eliminating the need to cut and discard them.
- Spring-Rod Solvent Channel: The dual spring-rod blade design creates a built-in channel that guides grip solvent deep inside the grip for faster, easier penetration.
- Rounded Edges and Tip: Smooth, rounded contact surfaces protect both the grip material and graphite shafts from scratching or deformation during removal.
- Dual-Blade Spring Construction: Twin flexible spring-rod blades spread progressively under the grip, lifting it evenly around the full circumference of the shaft.
- Effortless Release: Once solvent has penetrated fully, both the grip and the tool slide off the shaft together with minimal force required.
- Graphite-Safe Design: Suitable for use on steel and graphite shafts alike, with no sharp edges that could damage sensitive composite materials.
- Suitable for Most Grip Types: Works with the majority of rubber and cord golf grips; note that this tool is not recommended for use with Winn grips.
Technology in Detail
Spring-Rod Solvent Channel
The defining feature of this tool is its spring-rod construction, which forms a natural channel running down the centre of the blades. When grip solvent is applied, it is directed straight along this channel and flows rapidly beneath the grip, saturating the tape bond far more quickly than a conventional flat blade or knife. This accelerated solvent delivery dramatically reduces the time and effort needed to free even tightly fitted grips, and lowers the risk of grip distortion caused by excessive force.
Rounded Edges — Shaft and Grip Protection
Every contact surface of the Spring-Rod Grip Remover — from tip to blade edge — is carefully rounded and smooth. This means the tool glides between the grip and the shaft without scoring graphite fibres or leaving marks on the inside of the grip. The result is a grip that comes off in re-usable condition, and a shaft that remains pristine and ready for fresh tape and a new (or the same) grip. Particularly important for premium graphite shafts where surface damage can affect structural integrity.
Dual Spring-Rod Blade Action
Unlike a single rigid blade, the twin spring-rod blades flex and spread as the tool is worked around the circumference of the shaft. This progressive edge-to-edge lifting action breaks the adhesive bond evenly all the way around, preventing the grip from tearing or deforming on one side while remaining stuck on the other. The flexibility of the spring steel also gives the user tactile feedback, making it easy to feel when the solvent has done its job and the grip is ready to slide free.
Re-Installation Ready
The entire concept behind the Spring-Rod Grip Remover is non-destructive removal. Because the grip is never cut or stretched beyond its limits, it exits the process in a condition suitable for re-installation — either on the same club or a different one. This is especially valuable for golfers who swap grips between clubs seasonally, those who prefer a specific grip model that has been discontinued, or club fitters who want to refit a grip after shaft replacement. A grip saved is a grip you do not need to replace.
How to Use
- Apply grip solvent to the dual spring-rod blades of the tool.
- Carefully work the tip of the tool under the mouth (butt end) of the grip.
- Slide the tool up inside the grip along the shaft, applying additional solvent as needed to keep the blades lubricated.
- Work the tool briskly around the full circumference of the shaft, allowing the solvent channel to deliver fluid beneath the grip and dissolve the tape bond.
- Once the solvent has fully penetrated, both the grip and the tool will slide off the shaft together with very little effort.
- Allow the grip to dry thoroughly before re-installing, and apply fresh grip tape if required.
Specifications
| Specification | Detail |
|---|---|
| Product Code | TL289 |
| Brand | Masters Golf |
| Category | Club Servicing / Grip Tools |
| Tool Type | Spring-Rod Grip Remover |
| Blade Design | Dual spring-rod blades with integrated solvent channel |
| Shaft Compatibility | Steel and graphite shafts |
| Grip Compatibility | Most rubber and cord grips (not recommended for Winn grips) |
| Key Benefit | Non-destructive grip removal — grips preserved for re-installation |
Please note: This tool is not recommended for use with Winn grips. Always use an appropriate grip solvent and work carefully to protect both the grip and the shaft during removal.
Video
Specifications
No additional properties are available for this product.
Rating
We'd love to hear your opinion
Your review will help us and other customers when buying this product.
Please log in to add a review.
No reviews for this product yet.
Questions
