Description
Clubmaker 30/60 Epoxy
The Masters Golf Clubmaker 30/60 is a professional-grade, super-strong two-part epoxy adhesive supplied in a convenient dual-chamber syringe. Designed specifically for golf club assembly and repair, it delivers a reliable, long-lasting bond between shaft and clubhead for both steel and graphite shafts. With a generous 30-minute working window and a fast cure to full playing strength in approximately one hour, it is equally at home on a busy club repair bench or in the hands of a dedicated DIY clubmaker. The dual-chamber syringe format ensures a consistently correct 1:1 mix every time — no measuring errors, no wasted material.
Key Features
- Super-Strong Formula: Extra-strength two-part epoxy engineered to withstand repeated high-speed impact forces generated during play.
- 30-Minute Working Time: Ample open time for mixing, applying and precisely aligning a full set of clubs before the adhesive begins to set.
- Sets to Playing Strength in ~1 Hour: Reaches full bond strength in approximately 60 minutes under normal workshop conditions, minimising downtime.
- Cures Black: Finished cure colour is black, providing a clean, discreet appearance inside the hosel on all club types.
- Dual-Chamber Syringe: Pre-measured 1:1 resin-to-hardener ratio dispenses both components simultaneously for a consistently correct mix every time.
- Package Contents — 4 cl (40 ml): Sufficient quantity to complete a full set of club assemblies in a single session without interruption.
- Versatile Compatibility: Suitable for steel and graphite shafts bonded into metalwood, fairway wood, hybrid, iron and putter hosels.
Technology in Detail
Super-Strong Two-Part Epoxy
The Clubmaker 30/60 uses a professional two-part formulation — resin and hardener — that, once combined, forms an exceptionally high-strength thermoset polymer bond. The cured adhesive is engineered to resist the repeated shear and tensile stresses generated during a full golf swing, ensuring the shaft-to-clubhead joint remains secure over thousands of shots. Its impact-resistant properties make it the preferred choice of professional clubmakers and repair workshops who need absolute confidence in the joint under real on-course conditions. The fully cured bond does not degrade under the heat of a golf bag left in a car boot, nor does it become brittle in cold weather — delivering consistent mechanical integrity across all playing environments.
30-Minute Working Time
Unlike fast-cure epoxies that set within minutes, the 30/60 formula gives you a full 30-minute open working window from the moment mixing begins. This is ideal when assembling a complete set of clubs, as it allows you to methodically apply adhesive, seat each shaft in its hosel, and make precise alignment adjustments without the pressure of a rapidly closing working time. For a busy workshop processing multiple assemblies, the extended open time means fewer rushed joints and a consistently higher-quality finish. Air temperature and humidity will affect the exact open time — cooler conditions may extend it slightly, while warmer workshop environments may reduce it a little.
~1-Hour Full Cure to Playing Strength
Once applied and the shaft seated, the Clubmaker 30/60 reaches full playing strength in approximately one hour under normal workshop conditions (around 20–22 °C). This rapid cure cycle means a freshly shafted club can leave the bench the same day it was assembled, significantly reducing turnaround time compared to long-cure alternatives that require an overnight wait. The fast cure is particularly valuable for professional club fitters working to a tight schedule and for golfers who need a repaired club returned before a weekend round. Note that actual cure time varies with ambient temperature — warmer environments accelerate curing, while colder conditions (below 15 °C) may require a little longer; in cold workshops, gentle heat from a lamp can help.
Black Cure Finish
The Clubmaker 30/60 cures to a clean black colour, which integrates neatly with the dark interior of most metal hosels and the finish of most modern shafts. Any small amount of squeeze-out at the hosel mouth remains inconspicuous once wiped clean, providing a professional, factory-quality appearance with no visible residue. The black finish also makes it straightforward to identify fully cured adhesive visually during a quality-control inspection — if the adhesive is still grey or translucent, it has not yet reached full strength. This colour response is a useful practical indicator, particularly for technicians managing multiple club assemblies simultaneously.
Dual-Chamber Syringe — Precision 1:1 Dispensing
The clever dual-chamber syringe format holds resin and hardener in separate chambers and dispenses both components simultaneously in the correct 1:1 ratio with a single squeeze of the plunger. This eliminates the common measuring errors that occur when using separate bottles — even a small imbalance in the ratio can significantly weaken the final bond. The syringe format also greatly speeds up the application process, particularly when working through a full set of clubs, as there is no need to stop and measure each time. Between uses, the syringe tip can be capped to keep unused adhesive well-sealed, extending shelf life and preventing waste.
Full-Set Assembly Capacity — 4 cl (40 ml)
Each syringe contains 40 ml (4 cl) of adhesive — sufficient to complete the shafting of a full set of clubs in one uninterrupted session. This makes the Clubmaker 30/60 a cost-effective choice for professional club fitters and repair technicians who need to work efficiently through multiple assemblies without stopping to source additional adhesive. The syringe tip allows precise application directly into the hosel bore, minimising waste and ensuring the adhesive is deposited exactly where it is needed for the strongest possible joint. For a workshop that regularly re-shafts full sets, the 40 ml volume represents an excellent balance between economy and usability.
Specifications
| Specification | Detail |
|---|---|
| Product Code | TL141 |
| Type | Two-part shafting epoxy — dual-chamber syringe |
| Working Time | 25–30 minutes |
| Cure Time (to playing strength) | ~60 minutes (conditions dependent) |
| Cure Colour | Black |
| Package Contents | 4 cl (40 ml) syringe |
| Compatibility | Steel and graphite shafts; all hosel types (metalwood, fairway wood, hybrid, iron, putter) |
| Mix Ratio | 1:1 (resin : hardener) |
| Brand | Masters Golf |
| Category | Club Repair & Clubmaking Supplies |
For best results, ensure the shaft tip and hosel bore are thoroughly cleaned and lightly abraded before applying adhesive. Allow the assembled club to rest undisturbed for the full cure period before taking it to the course.
Specifications
No additional properties are available for this product.
Rating
We'd love to hear your opinion
Your review will help us and other customers when buying this product.
Please log in to add a review.
No reviews for this product yet.
Questions
