Masters Golf Drill Bit for Graphite Shafts 5/32 48"
Masters Golf Drill Bit for Graphite Shafts 5/32 48"
TL248A
Availability:
In stock at supplier
109 €
incl. VAT
You can return the goods within 100 days
Description
Masters Golf Drill Bit for Graphite Shafts 5/32 48"
The Masters Golf 48-inch extra-long drill bit is an essential workshop tool for any club repair technician or serious club-builder. Sized at 5/32" (3.96 mm) and engineered specifically for graphite shafts, this bit allows you to work on fully assembled clubs without the need to remove the shaft from the hosel — saving time and reducing the risk of accidental damage.
Key Features
- Extra-Long 48" (122 cm) Length: Reaches the full length of any standard golf shaft, enabling work on assembled clubs without disassembly.
- 5/32" (3.96 mm) Diameter: Precisely sized for graphite shafts, allowing clean drilling without over-boring the shaft interior.
- Swing-Weight Adjustment: Ideal for adding or removing internal shaft weights to fine-tune swing weight on fully assembled graphite-shafted clubs.
- Cork Stopper Removal: Suitable for drilling out cork or foam plugs seated deep inside the shaft without dismantling the club.
- Epoxy Clearing: Effective for coring out excess epoxy glue from shaft tips and hosel bores during re-shafting or repair work.
- Hosel Lightening: Quickly and effectively lightens up hosels as part of swing-weight balancing procedures.
Technology in Detail
Full-Length 48" Reach
At 48 inches (approximately 122 cm) in length, this drill bit is long enough to travel the entire interior of a standard golf shaft. This means swing-weight plugs, cork stoppers, and foam inserts seated at the grip end can all be accessed and drilled out without removing the grip or pulling the shaft from the club head — a major time-saver in a busy workshop.
Graphite-Specific 5/32" Sizing
The 5/32" (3.96 mm) diameter is carefully selected for use with graphite shafts. Graphite fibres are more delicate than steel, and an oversized bit risks delaminating the shaft wall. This precise sizing creates a clean bore while keeping the structural integrity of the graphite shaft intact, making it the correct tool for the job.
Swing-Weight Adjustment Without Disassembly
One of the most common workshop tasks is adjusting the swing weight of a graphite-shafted club. With this drill bit, the technician can insert the bit through the grip end of the assembled club to loosen, remove, or reposition internal weights — eliminating the need for a full strip-down and re-build, which saves both time and consumables such as grip tape and solvent.
Epoxy & Hosel Bore Clearing
During re-shafting procedures, residual epoxy frequently hardens inside the shaft tip and hosel bore. This bit is ideal for coring out that excess glue cleanly and efficiently. It can also be used to lighten hosels as part of a swing-weight balancing operation, making it a genuinely multi-purpose club-servicing tool.
Specifications
| Specification | Value |
|---|---|
| Brand | Masters Golf |
| Product Code | TL248A |
| Bit Diameter | 5/32" (3.96 mm) |
| Overall Length | 48" (approx. 122 cm) |
| Shaft Compatibility | Graphite shafts |
| Primary Use | Swing-weight adjustment, cork/weight removal, epoxy clearing, hosel lightening |
| Disassembly Required | No — works on fully assembled clubs |
| Category | Club Repair & Servicing |
Specifications
No additional properties are available for this product.
Rating
We'd love to hear your opinion
Your review will help us and other customers when buying this product.
Please log in to add a review.
No reviews for this product yet.
Questions
