Shafting Epoxy (2x 16oz/480ml)
Shafting Epoxy (2x 16oz/480ml)
TL178
Availability:
Ready to ship
Hurry up, only 1 piece left!
79 €
incl. VAT
You can return the goods within 100 days
Description
Shafting Epoxy (2x 16oz/480ml)
This professional-grade two-part epoxy adhesive is purpose-formulated for golf club assembly and reshafting. Supplied as two 16 oz (480 ml) bottles — Part A and Part B — it delivers an exceptionally strong, long-lasting bond between shaft and hosel on all club types. With a generous 40-minute working time and a clean black cure colour, it is the go-to choice for workshop professionals and high-volume clubmakers who demand reliable, repeatable results every time.
- Lap Shear Strength: Rated at 2,850 psi for a secure, high-torque-resistant bond that withstands the rigours of every swing.
- Heat Release Point: Breaks down at 250 °F (121 °C), allowing clean, damage-free shaft removal when reshafting is required.
- 40-Minute Working Time: Ample pot life lets you mix, apply, install and align the shaft without being rushed, even when processing multiple clubs in one session.
- Full Cure in 12 Hours: Reaches maximum bond strength within 12 hours at room temperature, so clubs are ready for play the next day.
- Black Colour: Cures to a discreet black finish that remains invisible inside the hosel and around ferrules.
- Large-Volume Kit: Two 16 oz (480 ml) squeeze bottles (Part A + Part B) provide enough adhesive for a high number of club assemblies in a single kit.
- Universal Compatibility: Bonds securely to steel, titanium, and composite clubheads as well as steel and graphite shafts.
Technology in Detail
2,850 psi Lap Shear Strength
The epoxy delivers a lap shear strength of 2,850 psi, ensuring the bond can resist the intense torsional and impact forces generated during a full golf swing. This level of shear resistance is well above the threshold required for safe club assembly and means the joint will outlast normal wear on both the shaft tip and the hosel bore. The formulation provides both shear and peel resistance, keeping the shaft firmly seated even under repeated hard contact.
Heat-Release at 250 °F (121 °C)
One of the most important properties of a professional shafting epoxy is the ability to release cleanly when heat is applied. This adhesive softens and releases at 250 °F, which is the accepted industry temperature for hosel heating with a heat gun. This means reshafting is straightforward and safe — the shaft can be removed without damaging the hosel, the ferrule seat, or the graphite fibres on composite shafts.
40-Minute Working Time
With a pot life of 40 minutes, this epoxy gives workshop professionals comfortable time to prepare multiple shafts in a single mixing session. Once the two components are combined in a 1:1 ratio, there is no need to rush shaft insertion or logo alignment. This extended working time also reduces material waste, as a larger batch can be mixed and applied across an entire set of irons or woods in one go.
Full Cure in 12 Hours
After shaft installation, the epoxy reaches full structural cure within 12 hours at ambient room temperature. This overnight cure cycle is the preferred method for premium club assembly because a slower cure produces a more elastic, resilient bond than fast-set alternatives. The resulting joint better absorbs vibration and micro-movement, contributing to consistent feel and long-term durability across the life of the club.
Black Cure Colour
The adhesive cures to a clean black finish, which blends seamlessly with dark hosels, carbon shaft tips, and black ferrules. Unlike clear or grey-curing epoxies, a black cure conceals any minor squeeze-out at the ferrule line, giving assemblies a professional, production-quality appearance. The black colouration does not affect bond performance and requires no additional finishing steps.
Large-Volume 2 x 16 oz Kit
The kit contains two 16 oz (480 ml) squeeze bottles — one for each component — providing a substantial supply for production workshops and frequent reshafters. The squeeze-bottle format allows precise, controlled dispensing directly into the hosel or onto the shaft tip, minimising mess and over-application. The large volume format offers a significantly lower cost-per-shaft compared to small-quantity cartridges.
Specifications
| Property | Value |
|---|---|
| Product Type | Two-part epoxy adhesive (Part A + Part B) |
| Mix Ratio | 1:1 by volume |
| Lap Shear Strength | 2,850 psi |
| Heat Release Temperature | 250 °F (121 °C) |
| Working Time (Pot Life) | 40 minutes |
| Full Cure Time | 12 hours at room temperature |
| Cure Colour | Black |
| Package Contents | 2 x 16 oz (2 x 480 ml) squeeze bottles |
| Total Volume | 32 oz (960 ml) |
| Application | Golf club shaft installation and reshafting |
| Compatible Materials | Steel, titanium, graphite composite, all standard hosel/shaft materials |
For best results, prepare shaft tips and hosel bores thoroughly before application — remove all traces of old epoxy, abrade steel shaft tips, and remove the polyurethane coating on graphite shafts. Allow a full 12-hour cure before putting clubs into play.
Specifications
No additional properties are available for this product.
Rating
We'd love to hear your opinion
Your review will help us and other customers when buying this product.
Please log in to add a review.
No reviews for this product yet.
Questions
