-22% Free shipping

SKB Deluxe ATA Golf Travel Case, STANDARD (130x40x30cm)

SKB Deluxe ATA Golf Travel Case, STANDARD (130x40x30cm)

2SKB-4814W
Description

SKB Deluxe ATA Golf Travel Case, STANDARD (130x40x30cm)

The SKB Deluxe ATA Golf Travel Case Standard (2SKB-4814W) is a premium hard-shell wheeled travel case engineered to keep your golf bag and clubs fully protected during air travel. Manufactured in the USA from the same ultra-high molecular weight polyethylene specified by the U.S. military for cases and containers, it meets or exceeds the ATA 300 Category I standard — the most rigorous airline transport specification in existence. Designed to fit classic stand bags up to 9.5" diameter and carry bags, with room for a pair of shoes, it accommodates drivers up to 48" (approx. 122 cm) in length. Whether you are a weekend traveller or a seasoned golf tourist, this case delivers confidence that your clubs will arrive in the same condition they left.

Key Features

  • ATA 300 Category I Certified: Meets or exceeds the highest airline shipping container standard, requiring the case to withstand a minimum of 100 flights, including 10 one-metre drop tests per flight.
  • Ultra-High Molecular Weight Polyethylene Shell: The same military-grade material used in U.S. military cases and containers — impact-resistant, impervious to solvents, oils, fuels, and acids.
  • Perfect-Match™ Valance Bending System: SKB's exclusive interlocking aluminium valance and neoprene O-ring gasket create a tight, sealed closure that keeps out dirt, dust, and moisture.
  • TSA-Accessible Locking Latches: Patented industrial-strength latches with a built-in TSA locking system allow airport security to inspect and re-lock the case without damaging the hardware.
  • Foam Padding in Lid: Moulded foam insert in the upper lid cushions club heads against impact during handling and transit.
  • Built-In Wheels and Handles: Quiet-glide wheels and multiple moulded-in handles (including a tow handle and centre carry handle) make airport navigation effortless.
  • Replaceable Wheels and Handles: All wheels and handles are user-replaceable, extending the service life of the case.
  • Made in the USA: Designed and manufactured in the United States to SKB's strict quality standards.
  • Lifetime Warranty: SKB-branded hard-shell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner.

Technology in Detail

ATA 300 Category I — Maximum Airline Protection

SKB ATA Sport Cases are crafted to meet or exceed ATA (Airline Transport Association) Specification 300, Category I — the highest standard for airline shipping containers. This specification requires the container to withstand a minimum of 100 round trips by air, enduring 10 drops from a height of 1 metre at each stage. It is the most stringent specification in the industry for transport containers and represents a standard that most soft-shell golf travel covers cannot approach. When you check this case at the airline counter, you can be confident it will deliver the same protection whether your bag makes one trip or one hundred.

Ultra-High Molecular Weight Polyethylene Shell

The outer shell is moulded from ultra-high molecular weight polyethylene (UHMWPE) — the same material specified by the U.S. military for cases and containers. UHMWPE combines exceptional impact resistance with low weight, and is fully impervious to solvents, oils, fuels, and acids encountered in airline cargo environments. The computer-designed contours incorporate moulded-in bumpers and structural ribs that absorb shock and vibration, protect exposed hardware, and create a unique male/female mating system for secure stacking in cargo holds. The result is a shell that is both extremely tough and lighter than comparable steel or aluminium constructions.

Perfect-Match™ Valance System & Neoprene Seal

SKB's exclusive Perfect-Match™ valance bending system uses an aluminium valance on both halves of the case to create a reliable tongue-and-groove closure. A neoprene O-ring gasket runs the entire perimeter of the case, sealing the interior against moisture, dust, and dirt — critical protection for airline baggage environments where cases are exposed to rain, condensation, and handling on wet tarmac. Combined with the patented industrial-strength latches, this system locks the two halves together with consistent, even pressure so the seal never fails in transit. The lid foam insert in the upper section further cushions golf club heads against impact.

TSA Locking System & Industrial-Strength Latches

The 2SKB-4814W comes equipped with a built-in TSA-accepted and TSA-recognised locking latch system that allows airport security personnel to inspect the contents of the case and then conveniently re-lock the latches — without drilling or cutting. The heavy-duty, die-cast locking latches are engineered for a lifetime of smooth, reliable service and provide superior valance closure security. This means your case arrives locked, as it left, at every destination. The TSA locking system eliminates the anxiety of damaged locks and ensures compliance with airline security requirements worldwide.

Wheels, Handles & Airport Manoeuvrability

Navigating a busy airport with a full set of golf clubs has never been easier. The 2SKB-4814W features quiet-glide built-in wheels that roll smoothly over airport terminal floors, and multiple moulded-in handles — including a top tow handle for pulling and a centre carry handle for lifting the case in and out of vehicles. The flat base allows the case to stand upright during check-in queues. Both wheels and handles are user-replaceable, so even if individual components are damaged in transit, the case can be quickly restored to full function without needing a complete replacement — an important advantage for frequent travellers.

Lifetime Warranty & Club Coverage

SKB stands behind every hard-shell case it manufactures with an Unconditional Lifetime Warranty covering defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, SKB will supply replacement parts, repair the case, or replace it entirely — for as long as you own it. The case also comes with SKB's $1,500 Club Coverage, providing additional peace of mind that your valuable equipment is protected not just by the physical case, but by SKB's financial commitment to your gear. Proof of purchase is required for all warranty claims.

Compatibility Note: This case is designed for classic stand bags and carry bags up to 9.5" diameter. It will not fit newer stand or cart bags with protruding top moulded handles that exceed 12" (approx. 30.5 cm) in overall width. If your bag features a protruding top moulded handle, please consider the SKB Pro Staff XL Golf Case (model 2SKB-SPXL) instead.

Specifications

ExteriorHard shell — ultra-high molecular weight polyethylene
WheelsYes — quiet-glide built-in wheels, user-replaceable
Interior Length123.83 cm (48.75 in)
Interior Width28.26 cm (11.13 in)
Interior Depth36.2 cm (14.25 in)
Exterior Length127.64 cm (50.25 in)
Exterior Width38.1 cm (15.0 in)
Exterior Height33.66 cm (13.25 in)
Weight (empty)7.12 kg (approx. 15.7 lb)
Max. Driver LengthUp to 48 in (approx. 122 cm)
Bag Size CompatibilityStand bags up to 9.5 in diameter, carry bags, cart bags
ATA RatingATA 300 Category I — highest airline transport specification
Closure SystemPerfect-Match™ aluminium valance + neoprene O-ring gasket
Latch SystemPatented industrial-strength TSA-accessible locking latches
Interior PaddingFoam insert in upper lid for club head protection
HandlesMoulded-in tow handle + centre carry handle, user-replaceable
Country of ManufactureUSA
WarrantyUnconditional Lifetime Warranty + $1,500 Club Coverage
Model Number2SKB-4814W
Specifications

No additional properties are available for this product.

Rating
We'd love to hear your opinion

Your review will help us and other customers when buying this product.

Please log in to add a review.
No reviews for this product yet.
Questions
Best price guarantee

More products from the same category